Johny Posted November 25, 2021 Share Posted November 25, 2021 Recently, as most of you know, I was changing the analogs on my controller and now I can’t connect it back to the console. I replaced the batteries and restart console. What can I do next? Any ideas. Translate Revert translation? Chinese (simplified) English (British) French German Polish Spanish Turkish Link to comment Share on other sites More sharing options...
Administrator edjazoli25 Posted November 25, 2021 Administrator Share Posted November 25, 2021 I’ve got two options for you in this case. Complete power cycle. To power cycle your controller follow steps below. *Press and hold the Xbox Home Button for 5-10 seconds, until the controller turns off. *Wait a few seconds, then press and hold the Xbox Home Button again to turn the controller back on. USB controller update *Press the Menu *Go to Settings > Devices & accessories> Select the controller. *Then select Update to download the new firmware to the controller. *When you see the Controller updated screen then check again for sync with console. The worst scenario is that by accident you’ve made a tiny damage the main board(motherboard) Translate Revert translation? Chinese (simplified) English (British) French German Polish Spanish Turkish Link to comment Share on other sites More sharing options...
Johnax Posted November 26, 2021 Share Posted November 26, 2021 As @edjazoli25 mentioned above. Update and full controller reset. Translate Revert translation? Chinese (simplified) English (British) French German Polish Spanish Turkish Link to comment Share on other sites More sharing options...
Alexis11 Posted November 26, 2021 Share Posted November 26, 2021 Any lights on/off when you trying to connect controller? RU sure the batteries are fully charged? Translate Revert translation? Chinese (simplified) English (British) French German Polish Spanish Turkish Link to comment Share on other sites More sharing options...
Johny Posted November 28, 2021 Author Share Posted November 28, 2021 @edjazoli25 all good now, thank you. The controller connect after power cycle, but I still went through the update to make sure everything is ok. Translate Revert translation? Chinese (simplified) English (British) French German Polish Spanish Turkish Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.